Jorc

Mini (full kit) service kit

The Jorc Mini (full kit) is served by the Purotech CSJMKST service kit.

Jorc Mini Purotech full service kit (equiv to CSEP035).

Request a quote Full CSJMKST detail

Made to the drawing. Every kit is made to a dimensioned drawing, with fill weights controlled at build, in Great Britain.

Purotech CSJMKST service kit for Jorc Mini (full kit) oil/water separator

The separator this fits

Placeholder schematic only, not indicative of the actual Jorc Mini (full kit).

The Jorc Mini (full kit) is a compressed-air oil/water separator. It uses replaceable filter bags, which is what the Purotech kit on this page supplies. The unit, lid and pipework stay in place.

Check the label on your unit against the part number above. If it does not match exactly, tell us what it says and we will identify it.

Full kit or single bags

The CSJMKST full kit is a white bag and a carbon bag. Order them together, or either bag on its own.

  • CSJMKST full kit: white and carbon bags (this page)
  • CSJMW white bag only
  • CSJMCST carbon bag only

What's in the box

2 bags. Every bag supplied is pictured below, so you can check what arrives against what you ordered.

  • CSJMKST/A, white bag supplied in the Purotech CSJMKST service kit × 1

    CSJMKST/A

    White bag

    Ø162 × 340 mm

  • CSJMKST/B, carbon bag supplied in the Purotech CSJMKST service kit × 1

    CSJMKST/B

    Carbon bag

    Ø162 × 200 mm

What you are replacing

2 bodies in the kit. Compare against what you removed. Dimensions are given per body, not per kit.

Part number Dimensions
CSJMKST/A Ø162 × 340 mm
CSJMKST/B Ø162 × 200 mm

Full specification for CSJMKST →

The same kit also fits these makes

CSJMKST is a single kit serving 3 models across 3 manufacturers.

Boge

Compair

Compatibility. Brand names are used for identification purposes only and do not indicate that Purotech supplies service kits manufactured or sold by those companies or brands.

Photographs. Kit photographs are our own, taken in house. Separator photographs are indicative: we have made every effort to show the right unit, but a photograph could differ from your model, so always check the part number on your unit's label.

Can't find your separator?

Call us with the model number or a photo of the label and we'll identify the right kit.

+44 (0)1543 502010 Contact Us