STERLING

CSR2000 service kit

The STERLING CSR2000 is served by the STERLING CSR2000SK service kit.

Service kit for CSR2000, comprises 2×CSR1000SK.

Request a quote Full CSR2000SK detail

Made to the drawing. Every kit is made to a dimensioned drawing, with fill weights controlled at build, in Great Britain.

The separator this fits

STERLING CSR1000 oil/water separator, the unit the STERLING CSR2000 is
Shown: one STERLING CSR1000. The CSR2000 is 2 of them.

The STERLING CSR2000 is a compressed-air oil/water separator. It uses replaceable filter bags, which is what the STERLING kit on this page supplies. The unit, lid and pipework stay in place.

Check the label on your unit against the part number above. If it does not match exactly, tell us what it says and we will identify it.

What you are replacing

3 bodies in the kit. Compare against what you removed. Dimensions are given per body, not per kit.

Part number Dimensions
CSR1000SK/A × 2 Ø366 × 340 mm
CSR1000SK/B × 2 Ø388 (upper) → Ø366 (lower) × 270 mm
CSR1000SK/C × 2 Ø389 (upper) → Ø328 (lower) × 190 mm

Full specification for CSR2000SK →

The same kit also fits these makes

CSR2000SK is a single kit serving 2 models across 2 manufacturers.

KSI Technologies

Compatibility. Brand names are used for identification purposes only and do not indicate that Purotech supplies service kits manufactured or sold by those companies or brands.

Photographs. Kit photographs are our own, taken in house. Separator photographs are indicative: we have made every effort to show the right unit, but a photograph could differ from your model, so always check the part number on your unit's label.

Can't find your separator?

Call us with the model number or a photo of the label and we'll identify the right kit.

+44 (0)1543 502010 Contact Us